Whether the amount of oil in the electric lubrication pump is appropriate will also affect the working state of the equipment. Therefore, when the oil volume of the equipment is found to be inappropriate, you can adjust it according to the following methods, then make the oil volume reach the required level. On demand.

1. When the electric lubrication pump is working, the start time of oil supply remains unchanged, the end of oil supply time is changed due to the change of the plunger hypotenuse to the direction of the oil return hole of the plunger sleeve.

2. The effective stroke of the plunger is also different as the point of view of the plunger rolls, so the fuel supply is also changed.

3. The larger the plunger's view point for the non-fuel level roll, the greater the distance between the upper end of the plunger the opening of the oil return hole of the plug sleeve, the greater the amount of oil supply. If the plunger rolls over the view point If it is smaller, the oil cut will start earlier, the grease pump will supply less oil.

4. When the diesel engine is parked, the oil must be cut off. For this reason, the longitudinal groove on the plunger can be turned to the oil return hole on the plunger sleeve.

5. At this time, during the entire plunger stroke of the electric lubrication pump, the fuel in the plunger sleeve flows back to the oil passage through the longitudinal groove the oil return hole. There is no oil pressure process, so the oil supply is zero.

6. When the plunger rolls, use the moment of changing the end point of the fuel supply to adjust the fuel supply.

When the electric lubrication pump is in operation, its transmission method is an important part of it. When we operate the product, we have to ensure the integrity of its application function. We must understand its transmission method so that we can To help the product make better use, then let us focus on analyzing the characteristics of the product's transmission method. Friends who are interested can pay attention to this aspect of common sense.

1. Pay attention to electric lubrication pump hot oil pump lubrication transmission method. It can be noticed that the overall pumping speed pressure range are proportionally related, the two should achieve a more harmonious effect in each part. the perspective of all wheels, it can be noticed that the equipment is often good in terms of the geometric symmetry of the wheels, so the length of the operation is always stable, the overall faulty sound is also very low, in a lower noise range in.

2. In the process of practical equipment application, the interior of the specific electric lubrication pump cavity does need any lubricating oil to alter, so the overall application guarantee effect is also good. The structure of the pump chamber is also very simple, without the design of compression exhaust valves, all parts can be operated better. In the practice of hydrogen pumping, it can be noted that this part of the pumping effect is often so ambitious.