The oil filter is mainly used to filter the moisture solid impurities in the oil to improve the performance of the oil, to improve the insulation performance of the oil the purity compressive strength of the oil. It can be regenerated consumes oil to save energy save costs. .

New oil also needs to be filtered:

Most people have a lack of understanding of oil purifiers. They think that only used oil needs to be purified. In fact, many new oils also need to be purified. For example, smooth oil will undergo physical chemical changes under the effects of high temperature high pressure. After oxidation superposition, colloidal substances are formed. The precision filter wholesale makes the oil thicker presents sludge; it is contaminated diluted by fuel. It may be contaminated by water, resulting in a decrease in oil viscosity even emulsification. Unqualified oil will cause great damage to the equipment itself.

Damage to equipment caused by unqualified oil:

Water is a great damage to equipment caused by industrial oil. For example, there are three main oils for the damage of moisture in smooth oil:

1. When the lubricant is mixed with water, it is easy to produce foam block the oil passage. It will also increase the freezing point of the lubricant, which is conducive to low-temperature flow performance. At the same time, it will also weaken the strength of the oil film, reduce the smooth performance, cause wear of the machine parts.

2. Moisture will interact with the iron filings that fall into the smooth oil to generate iron soap. The iron soap of the Precision Filter Company mixes with dust, machine stains gums in the smooth oil to form sludge, which accumulates in the smooth oil system In the oil passages the filter screens of various filters, there is a lack of oil supply on the conflicting surfaces, which accelerates the wear of the parts.

3. The moisture in the lubricating oil will also absorb the sulfur-containing oxides low-molecular organic acids in the exhaust gas of the combustion chamber, which will increase the corrosion of metals.

About lubricating oil filtration: lubricating system leaks, sealing is tight, oil is exposed to thermal load for a long time, open oil storage other reasons, moisture gas in the air penetrate into the oil, resulting in water gas in the lubricating oil. Due to leakage of the lubricating system, particulate dust in the air system abrasion dust falling off, long-term operation of the lubricating oil under high temperature water will inevitably lead to the decomposition of part of the oil the separation of colloidal substances